Will Comet Scratch My Bathtub?

Comet is a household cleaner that many people use to clean their bathrooms. But does Comet really scratch your bathtub?

In this blog post, we will discuss the pros and cons of using Comet to clean your bathroom.

We will also provide tips on how to prevent your bathtub from getting scratched.

Will Comet Scratch My Bathtub?

Comet is a powerful cleaning product that has been around for decades. It’s known for its ability to remove tough stains and build-up, making it a popular choice for cleaning bathrooms.

However, many people are concerned about using Comet on their bathtub, because they don’t want to scratch the surface.

While it’s true that Comet can scratch some types of surfaces, it is safe to use on most types of bathtubs.

The best way to avoid scratching your tub is to apply Comet with a soft cloth or sponge and avoid scrubbing too aggressively.

If you do accidentally scratch your tub, you can usually buff out the scratches with a little elbow grease.

In general, though, Comet is a safe and effective way to clean your bathtub.

Do you have to make use of Comet in the bathtubs?

Comet is a brand of cleaning product that has been around since the 1940s.

The product is intended for use on hard surfaces like countertops and bathtubs. Comet contains an abrasive powder that can help to remove stains.

To use Comet on a stain, pour some of the powder onto the stain and then add water.

Use an scouring pad to scrub the area. You can also make a paste from Comet and water.

Mix the two ingredients in a bowl and let the paste sit on the stained area for 15-30 minutes before scrubbing. comet can be effective at removing stains, but it may also damage some surfaces.

Use caution when using this product and test it on an inconspicuous area first to make sure it will not damage your bathtub or countertop.

How do you clean Comet powder from the bathtub?

If you’ve ever tried to clean a bathtub with Comet powder, you know that it can be a bit of a challenge.

The powder is abrasive and can cause scratches, and it’s also difficult to rinse away completely.

However, there are a few tips that can make the process easier. First, make sure that the tub is dry before you start.

Wetting the tub first will only make the Comet more difficult to remove.

Next, sprinkle the Comet evenly over the surface of the tub and use a damp cloth to scrub in small circles.

Be sure to work slowly and avoid pressing too hard, as this can damage the finish on your tub.

Finally, rinse the tub thoroughly with warm water to remove any lingering residue.

With a little bit of patience, you can get your bathtub sparkling clean with Comet powder.

Does Comet cleaner scratch?

As any homeowner knows, keeping a house clean can be a challenging task.

Stains, soap scum, and tough water films can quickly build up, making surfaces look dirty and neglected.

However, with the right cleaner, even the most stubborn grime can be easily removed.

Comet Bleach Powder is an all-purpose cleanser that attacks tough stains in bathrooms, kitchens, and all over the home.

The powerful formula removes soap scum, hard water deposits, and other stubborn dirt, leaving surfaces clean and shining.

In addition, Comet Bleach Powder disinfects as it cleans, helping to keep your home free of harmful bacteria.

So if you’re looking for a cleaner that can tackle even the toughest messes, Comet Bleach Powder is a great choice.

Is Comet good for bathrooms?

Comet is a powerful cleaning agent that can effectively cleanse your shower and bathtub.

It’s great for removing hard water deposits and soap scum, and it can also help to keep your shower curtain clean.

However, it is important to use Comet sparingly, as it can be abrasive and damage some surfaces if used too frequently.

Overall, Comet is a good choice for bathroom cleaning, but be sure to use it wisely to avoid damaging your bathroom surfaces.

Are you sure? Comet too rough?

Comet and Ajax are two common brand names for silica-based cleaners.

These cleaners are effective at removing dirt and grime from surfaces due to the abrasives they contain.

However, it is important to be aware that these cleaners can also scratch porcelain surfaces.

When using these cleaners, it is important to take care to avoid scratching delicate surfaces.

For tough cleaning jobs, Comet or Ajax can be a good choice.

However, if you are concerned about damaging your surfaces, you may want to consider another type of cleaner.

Is Comet an abrasive cleaner?

Comet is a deodorizing cleanser that contains an abrasive. The abrasive in Comet is calcium carbonate, which has a Moh’s hardness of around 3.5.

This means that it is slightly less abrasive than other common abrasives, such as baking soda (which has a Moh’s hardness of around 9).

However, Comet should still be used with care, as it can damage delicate surfaces if used too aggressively.

When cleaning with Comet, it is important to follow the manufacturer’s instructions and to use a soft cloth or sponge.

For best results, Comet should be used on surfaces that are already clean and free of dirt and grime.

Do you have to make use of Comet for porcelain?

Comet cleanser is among my favorite products to utilize.

Contrary to what you’ve received, Comet cleanser will not scratch your sink.

No matter what type of sink you have, whether it’s porcelain stainless steel, cultured marble and natural stones, chances will be you’ll find that Comet cleanser will be able to work.

Comet makes use of a non-abrasive formula that’s tough on stains and leaves your sink with a sparkling finish.

What’s more, Comet is affordable and easy to find, making it a great option for those looking for an effective way to clean their porcelain sink.

Do I need to know how long allow Comet let it sit?

When cleaning with Comet, you will generally want to let it sit for at least 15 seconds before scrubbing.

This gives the Comet time to break up the dirt and grime so that it can be more easily removed.

For tougher stains, you can wet the surface first, then sprinkle on Comet and let it stand for one minute before scrubbing.

Once you have finished scrubbing, be sure to rinse the area well to remove any residue.

By following these simple steps, you can ensure that your surfaces are clean and fresh-smelling.

Why would you want to place dawn in your bath at late at night?

Dawn dishwashing soap is surprisingly effective at getting rid of bathtub scum.

If you are looking for a quick and easy way to clean your tub, Dawn is a great option.

Simply squirt some Dawn onto a scrub brush or sponge and scrub the tub.

You may be amazed at how well Dawn removes dirt and grime.

In addition to being effective at cleaning bathtubs, Dawn is also great for cleaning pans and dishes.

So, if you are looking for an all-purpose cleaning solution, Dawn is a good choice.

Are Comet truly scratch-free?

Comet was originally introduced in 1956 as a powder cleanser that contained abrasives.

The original formula was effective at cleaning tough stains, but it also left scratches on surfaces.

In response to consumer demand, Comet reformulated their powder cleanser in 2006 to be scratch-free.

The new formula still contains the same cleaning agents as the original, but it does not contain any abrasives.

As a result, it is safe to use on all surfaces, including delicate ones like glass and porcelain.

While the new formula is less likely to cause scratching, it is important to note that no cleaner is completely scratch-free.

If Comet Powder Cleaner is used incorrectly or on a surface that is already scratched, it can still cause damage.

Therefore, it is important to follow the directions on the label and use caution when cleaning delicate surfaces.


Comets have always been a source of fascination and mystery.

Some people believe that they are harbingers of doom, while others see them as beautiful celestial objects.

Whether you believe in the myths and legends surrounding comets or not, one thing is for sure: they can cause a lot of damage if they hit something hard enough.

Recent Posts